Duraflame Stix Multi-use Firestarters - 12 ct

Duraflame Stix Multi-use Firestarters - 12 ct

1.9 lb bag

Ingredients

Stix Multi-Use Firestarters.

Warnings

Use caution when building a wood fire: Open fireplace damper before lighting a fire. Close wire mesh protective screen after the fire has started. Do not poke burning firestarters as flaming particles may stick to the tools. Never add any volatiles (e.g., liquid firestarter, aerosol cans) to any fire. Never leave a fire unattended, nor allow children or pets to play near the fireplace. If necessary to extinguish a fire, use a fire extinguisher or carefully douse fire with water or sand. Use caution when lighting a BBQ fire: Always follow charcoal and grill manufacturers' instructions. Only use BBQ outdoors in a well- ventilated area. Store firestarters in a cool, dry place away from heat and direct sunlight. Keep out of reach from children and pets. Not suitable for human or animal consumption. California Proposition 65: The emissions from burning a firestarter and firewood can expose you to chemicals including carbon monoxide, soot, smoke and other combustion by-products, which are known to the State of California to cause cancer, birth defects or other reproductive harm, and/or other adverse health effects. For more information go to www.p65warnings.ca.gov. Air Quality Advisory (Nov-Feb): Use of this and other solid fuels may be restricted at times by law. Please check 1-877-4NO-BURN or http://www.8774noburn.org before burning.

Details

Duraflame stix Multi-use Firelighters For fireplaces, BBQs, and campfires. Just split, stack & start. Starts wood and charcoal fires quickly and easily. Lights 6 wood fires or 12-24 BBQ fires. 12 – 2.5 oz Firelighters Net Wt: 30 oz (850.5 g) Multi-use firestarters that quickly and easily start wood and charcoal fires. Duraflame stix firestarters are made from 100% renewable waxes and oils combined with recycled wood and agricultural fibers. No petro-chemicals are used. Reduces total emissions from wood fires Using duraflame stix Firestarters to light a wood fire results in faster and more complete ignition of the fire, reducing emissions of particulate matter and carbon monoxide. One package will light 6 wood fires (2 sticks per fire), or 12-24 BBQ fires (1/2 stick per 2lb of charcoal). Read instructions and cautions on wrapper before use. Certified low VOC emission product. This product complies with South Coast Air Quality Management District Rule 1174, ref# C221-B10. Processed solid fuel for use in factory built fireplaces. Duraflame stix Firestarters are suitable for use in UL listed factory-built fireplaces. A fast, sure way to start a wood fire.?Replaces messy newspaper and kindling.?One firelighter burns up to 30 minutes, long enough to start even difficult to light wood fires.?Reduces total emissions from wood fires:?Lighting wood fires with newspaper or kindling produces a significant portion of the total emissions of a wood fire. Using duraflame firestart firelighters to light a wood fire results in faster and more complete ignition of the fire, reducing emissions of particulate matter and carbon monoxide.?Duraflame firestart firelighters are made with wax and a blend of recycled and renewable biomass fibers.? Air Quality Advisory (Nov-Feb):?Use of this and other solid fuels may be restricted at times by law. Please check 1-877-4NO-BURN or http://8774noburn.org. before burning. California Proposition 65: WARNING The emissions from burning a firestarter and firewood can expose you to chemicals including carbon monoxide, soot, smoke and other combustion by-products, which are known to the State of California to cause cancer, birth defects or other reproductive harm, and/or other adverse health effects. For more information go to www.P65Warnings.ca.gov.?Corrugated recycles.? ©2017 Duraflame, Stix, the duraflame flame symbol, the duraflame trade dress, logo and fireWise are registered trademarks of Duraflame, Inc. Visit: www.duraflame.com

Instructions for lighting a wood fire: 1. Break off two (2) stix firestarter sticks. (Store remaining firestarters pieces in a recloseable bag for future use.) 2. Place in an "X" configuration on the center of the fireplace grate. 3. Place a couple pieces of firewood around the firestarters. Light the ends of the firestarters. 4. Once the fire is ignited, carefully add more wood as needed. Close fireplace screen. Instructions for lighting a BBQ fire: Use 1/2 a firestarter stick per 2lb of charcoal. 1. Use 1/2 of a stix firestarter stick for each 2lbs of charcoal. Break off one (1) section from the block of six. Break that piece in half. (Store the remaining firestarter pieces in a reclosable bag for future use.) 2. Place the 1/2-piece on the bottom of the grill (under the charcoal grate). (If the grill has a flat bottom, break off two small pieces from the ends of the 1/2-piece and use them as supports under the larger piece to allow air flow under the starter material.) 3. Replace the bottom grate and arrange charcoal briquettes in a pile on the grate. Light the starter through the grate with a utility lighter or long-stem match. 4. Begin cooking after the majority of the briquettes have ashed over.

Country of Origin

USA

Manufacturer

Duraflame, Inc.

Address

Stockton, CA 95203