0.14 oz pkg
Precision Control Pen.
First aid treatment: If eye contact occurs, rinse with tap water for 5 - 10 minutes. Iff irritation persists, seek medical care. For further health information contact a Poison Control Center or call 1-888-516-2502. Bonds skin instantly, eye irritant. Not for use on foam, rear view mirrors, polyethylene, or fluorinated resin. Do not put bonded items in oven or on stove. Do not use to attach artificial nails. Immediate bonding of the skin, eyes or mouth may occur on contact. Contains: Cyanoacrylate glue. Precautions: Keep away from eyes. Keep out of reach of children. First aid treatment: If eye contact occurs, rinse immediately with water then flush with tap water for 15 minutes. If irritation persists, seek medical care. To prevent skin bonding, wash immediately with water. If skin bonding occurs, soak in acetone-based nail polish remover or warm soapy water and carefully peel or roll skin apart (do not pull). Contact through clothing may cause skin burn. If spilled on clothing, flush with cold water. Avoid prolonged breathing of vapors. Use with adequate ventilation. For further health information contact a Poison Control Center or call 1-888-516-2502. For further information only, call toll free 1-888-435-6377.
Krazy® Glue Precision Control Pen All Purpose. #1 Super glue*. Krazy strong, krazy fast. Fast setting, long lasting. Bonds: Ceramic, plastic, wood, glass, porcelain, metal, leather, rubber, and vinyl. 4 g (0.141 oz). The #1 super glue, krazy glue creates an instant bond that's ultra-strong and durable. Krazy strong, krazy fast™. All purpose precision control pen. One glue, infinite uses. Our versatile all purpose formula bonds to a wide variety of surfaces. Easy to hold and control for precise pin point application of glue. Retain this card for the life of the product. ACMI Art & Creative Materials Institute Certified®. Conforms to ASTM D 4236. Packaged in the U.S.A. *Based on USA 2011 retail sales data. "Krazy" and the "Hanging Man" logo are registered Trademarks of Toagosei Co., Ltd. Call toll free 1-888-435-6377. For other info, write us. Visit us at www.krazyglue.com. ©2016 Elmer's Products, Inc.
1.Protect work area. Surfaces should be clean and dry. 2. Remove cap by twisting and squeeze pen body where it says "push" to allow flow of krazy glue. The harder the pen is pressed, the more glue will be released. Apply a small amount. Do not cut or pierce tip. 3. Hold parts together for 30 seconds. 4. To keep your krazy glue fresh, replace cap and store in a cool, dry place.
Elmer's Products, Inc.
460 Polaris Parkway Westerville, OH 43082