1 ea pkg
Liquid Dye Ingredients: Water, Maltodextrin, Citric Acid, Xanthan Gum, Sodium Benzoate (Preservative), Potassium Sorbate (Preservative), Sodium Citrate, Benzyl Alcohol, Sodium Hydroxide, Disodium EDTA (Preservative), Blue 1, Red 3.
Contains: 2 liquid egg dyes, Total Net: 0.132 fl oz (3.9 ml), 2 coloring bags, 3 rub-on transfer sheets, 2 tub-on-sticks, 12 egg stands. R.J. Rabbit approved. Make out-of-this-world, Easter egg galaxies! This product is for one time use only. Galaxy rub-on transfers. Star transfers. Rub-on sticks. Coloring bags. Galaxy egg stands. Purple egg dye. Blue egg dye. Conforms to ASTM D-4236.
Helpful Hints: 1. Read instructions before starting. 2. Hard boil clean white eggs in enamel, stainless steel or glass pan. (Do not use aluminum or iron). 3. Egg dyes work best on warm, dry eggs. Do not use wet eggs. 4. Set up drying tray by punching out the perforated disks on the back of this box. Tape the ends of the box for added strength. 5. Use cardboard egg carton to dry extra eggs. Note: If you store colored eggs in the refrigerator the egg dyes will become wet again and may stain. Please use care. Liquid Egg Dye Instructions: 1. Cover work area with newspaper. 2. Place a warm egg into a coloring bag. 3. Snip open the blue liquid egg dye packet and squeeze 2 to 3 drops onto warm egg inside the coloring bag. 4. Using both hands, rub outside of bag until egg is partially covered with blue dye. 5. Snip open the purple egg dye packet and squeeze 2 to 3 drops onto partially colored egg inside the coloring bag. 6. Place colored egg onto the built-in drying tray to thoroughly dry. Applying Rub-On Transfers: Galaxy Rub-On Transfers: 1. Cut out a white or gold star cluster from the Galaxy Rub-On Transfer sheet. 2. Place and hold the printed side onto a dry, colored egg. 3. Using the rub-on stick, gently rub the backside of the transfer sheet until image transfers to the colored egg. Star Transfers: 1. Select and cut out a small group of stars. 2. Repeat steps 2 and 3 above. To Assemble Egg Stands: Lock ends as shown here. Tape for added strength.